Residential Handicap Lifts
- Capacity: 550 lbs (250 kg)
- Lifting speed: 16 f.pm. (81 mm/second)
- Low height : 3″ (76 mm)
- Platform size: 36′ x 48″ (914 mm x 1219 mm)
- Floor ramp: 18″ x 34″ (457 mm x 864 mm)
- Safety gate: 42″ high (1067 mm) standard
- Safety bar and tilting floor ramp – optional
- 110 volt plug in pump unit
- 24 volt push button control – standard on lift
- Heavy duty hydraulic cylinder
- Dual type pick up chains for safety
- Failing platform velocity fuse – standard
- Unit pre-tested to lift 800 lbs.
- Optional controls:
- Key control (2 keys supplied)
- Wing lever – auto up – CP down
- Joy stick
- Upper level call – send unit – push button
- Lower level call – send unit – push button
- Controls will not function until gate or safety bar is closed
- Gate or safety bar is mechanically locked when lift is elevated
- Pump to have a manual lower valve
- Lowering solenoid needs power to lower lift
- Platform and ramp surfaces finished in anti-skid
- Speeds do not exceed .15 m/sec.
- Load capacity is 250 kg. (550 lbs.)
- Adequate platform size 12 sq. ft. (1.73 m2)
- Safety factors – 5/1 hydraulic – 3/1 mechanical
- Designation sign
- Up limit switch (Electric) plus mechanical stop
- Down speed to match up speed
- Relief valve 125%
- Pressure gauge – Optional
- Anti-creep device – Optional
- Pump and cylinder in a non-accessible location
- Hydraulic velocity fuse and reset button